Favero Assioma Power Meter Pedals - breakthrough technology applied to cycling, to make your training more efficient and effective than ever. Set your targets with ultra-precise and reliable watt measurements. Hard facts, not estimates, to make the most of each pedal stroke.

Road power meter with sensors on both pedals. The best choice to take full advantage of the real dual-sided measurement.

Overview

Easy to install

Install and move your Assioma DUO pedals from one bike to another just like your normal pedals. You can do it easily and without extra tools or the need for a mechanic.

IAV Cycling Dynamics

Our bike power meter pedals provide advanced metrics called IAV Cycling Dynamics: IAV Power Phase and IAV Rider Position. These metrics, combined with the classic power data, permit you to analyze your pedaling technique in detail and learn about how your position on the bike influences your performance.

IAV Power and gyroscope

Unlike others, when calculating power Assioma takes into account our inevitably irregular pedaling (e.g. uphill, sprints) or the use of oval chainrings. This is because Assioma can detect the actual instantaneous angular velocity during the whole pedal stroke, thus providing ±1% accuracy in any conditions.

Bluetooth and ANT+

Assioma features both Bluetooth and ANT+ connectivity for a seamless compatibility with bike computers and smartphones (both Android and iOS).

Real dual-sided power data

The Favero Assioma DUO power meter pedals measure power individually on both legs. This makes possible to observe with accuracy not only Total Power, but also L/R Balance.

Accuracy and consistency

Assioma guarantees accurate and consistent data in all conditions on the road, and at any temperature ranging from -10°C and 60°C, thanks also to the ATC (Automatic Temperature Compensation).

Waterproof, resistant and light

The power sensors are protected by a bi-component resin block, extremely resistant to shocks and completely waterproof.

Rechargeable and green

The Assioma power meter pedals use rechargeable batteries with a single charge ensuring at least 50 hours of use.
Do you want to learn more about the advantages of our rechargeable batteries? Read the article!

Tested and guaranteed

Favero Electronics produces every bike power meter in-house and tests each of them thoroughly to fully satisfy the standard required by current regulations.

- MEASURED DATA -

Power - measures the power hundreds of times per second and continuously transmit the collected data to your bike computer or smartphone via Bluetooth and ANT + technology.
Cadence - indicates the number of revolutions made by the pedal in one minute (rpm). The in-built cadence sensor of Assioma constantly detects and transmits this value to the bike computer: making it therefore superfluous to use a separate cadence sensor.
Left/Right Balance (DUO only) - indicates, as a percentage, the power individually generated by the left leg and the right leg. The L/R Power Balance values allow you to monitor the dominant/non-dominant leg ratio and observe how this varies in relation to different racing and fitness conditions. This can be useful to correct penalizing imbalances: also in post-traumatic rehabilitation programs. Unlike others, the Assioma power meter pedals return these metrics through real dual-sided measurements, not estimates
Torque Efficiency (TE) - indicates, as a percentage, how much of the power generated during one pedal stroke actually contributed to the propulsion of the cyclist. A 100% Torque Effectiveness occurs when no Negative Power has been accumulated during a pedal stroke. The typical TE value may vary between 60% and 100%. Assioma UNO indicates the Torque Effectiveness value for the left leg; whereas Assioma DUO provides data for both left and right leg.
Pedal smoothness (PS) - indicates, as a percentage, how evenly distributed the power is in a full revolution of a pedal stroke. A value of 100% means that the power is delivered constantly throughout all the revolution: the higher the value the "rounder" the pedaling. Assioma UNO indicates the PS value of the left leg; whereas Assioma DUO provides separate data for both the left and the right leg.

- SPECIFICATIONS -

Data Recording & Transmission

Protocol - ANT+ PWR (CT + PO) profile, Bluetooth v4.0
Transmitted data - power (Watt), cadence (rpm), L/R balance % (only for Assioma DUO), torque efficiency (TE), pedal stroke uniformity (PS)
Power accuracy - ± 1%
L/R balance - 0 to 100% (DUO only)
Cadence - 30 to 180 rpm
Power sensor on left pedal only
Cadence sensor: included, inbuilt
Gyroscope: included, inbuilt
Power calculation system: IAV (Instantaneous Angular Velocity-based)