Weldtite TF2 Carbon Fibre Gripper Paste 50g

Stop Carbon Slipping. Protect Carbon Components.

Carbon fibre components demand a different approach to assembly. The micro-textured surface of carbon requires grip paste to prevent the slipping and creaking that come with torque cycling and vibration under load. Weldtite TF2 Carbon Fibre Gripper Paste increases surface friction at carbon interfaces — seatposts, stem clamps, handlebar clamps — allowing you to use less clamping torque while achieving a more secure, stable fit. Less torque means less stress on carbon fibres.

For use on carbon-on-carbon or carbon-on-metal interfaces only. Apply a thin, even layer to contact surfaces before assembly. Re-check and reduce torque settings after application — grip paste increases friction, so less clamping force is required.

50g

Net Weight

Reduces

Clamping Torque

Prevents

Slipping & Seizing

Carbon

Components Only

Increases Surface Friction

Micro-particles in the paste bond to carbon surfaces, dramatically increasing grip between components under load.

Reduces Required Torque

Achieve a secure grip with lower clamping torque — reduces stress on carbon fibres and lowers the risk of cracking from over-tightening.

Prevents Slipping

Stops seatposts dropping under pedalling load and handlebars rotating in stems — solves the most common carbon assembly problems.

Prevents Seizing

Coating prevents carbon-on-carbon and carbon-on-metal interfaces from bonding permanently over time — disassembly remains easy.

Seatpost & Stem Use

Designed for stem clamp areas, seatpost, handlebar clamps, and any other carbon-to-component interface on the bike.

50g Tube

A thin layer per application means this 50g tube provides dozens of assembly uses. Only a small amount is needed each time.

Specification	Value
Net Weight	50g
Type	Carbon assembly gripper paste
For Use On	Carbon fibre components only
Application Points	Seatpost, stem clamp, handlebar clamp, carbon interfaces
Effect	Increases friction, reduces required torque, prevents slipping & seizing
Format	Tube
SKU	W2003

(W2003)

Increases Surface Friction: Micro-particles bond to carbon surfaces and dramatically increase grip at clamp interfaces under load.
Reduces Required Torque: Achieve secure clamping with lower torque values — reduces risk of cracking carbon from over-tightening.
Prevents Slipping: Stops seatposts dropping and handlebars rotating in stems under pedalling load.
Prevents Seizing: Stops carbon-on-carbon and carbon-on-metal interfaces bonding permanently — disassembly stays easy.
For Carbon Components Only: Designed for use on seatposts, stem clamps, handlebar clamps, and all carbon interfaces.
50g Tube: A thin layer per use means many assemblies from a single tube.
Weldtite TF2 Range: Part of Weldtite's TF2 professional maintenance range — trusted in workshops worldwide.
Easy Application: Apply a thin, even layer to contact surfaces before assembly. Re-check torque settings after application.

Specification	Value
Net Weight	50g
Type	Carbon assembly gripper paste
For Use On	Carbon fibre components only
Application Points	Seatpost, stem, handlebars, carbon interfaces
Format	Tube