Zipp’s 303 Firecrest® Tubeless Disc-brake wheelset is designed for the real world… a world of imperfect conditions, road surfaces, and elements where the bottom line is simple. Efficiency = speed. It’s faster, lighter, and more capable over varied terrain—whether the surface is pavement in all its conditions or no pavement at all. Deeply rooted in Zipp’s drive to conquer the Spring Classics, the new 303 Firecrest is remade with a purpose-made approach for the demands of modern road bikes. When it comes to going fast on a bicycle, efficiency means reduced: Wind resistance, rolling resistance, rider fatigue, weight. The 303 Firecrest Tubeless Disc-brake was designed using real-world direct measurements (vs. primarily wind tunnel or computer simulation). The results were huge. Its rim is slightly more bulbous in design than its predecessor, with a 30mm outside width, a 25mm internal width, and a 40mm rim depth. The profile provides low drag and an improved transition between rim and tire, boosting aero efficiency on the road. The wide rim stance also features less tire deflection for reduced rolling resistance. The combination of the wider tire, increased tire volume, and lower tire pressure helps to reduce rider fatigue by smoothing out the ride over imperfect pavement and road conditions—the tire and wheel system absorbs the shaking, not the rider. At the center of the 303 Firecrest Tubeless Disc brake is a versatile and durable new hubset, the German-engineered ZR1 DB. This hubset features 66 points of engagement for quicker response. The 303 Firecrest Tubeless Disc-brake wheelset is for dedicated cyclists who aspire to the latest in technology. Its competitors… in races, against peers, or simply conquering personal limits. This is about becoming faster and matching your motivation to the most advanced technology.

 

 

FEATURES

  • Zipp graphics and cosmetic identity that scream speed
  • Versatile endurance wheelset for the modern road bike with tubeless and hookless rim profile
  • Lighter Weight than its predecessor, making it nimble and fast.
  • Tubeless Made Easy, optimized tire bed sign allows for simple tool-free installation and removal with no need for an air compressor to seat the tire.
  • Ultra-wide 25mm rim profile creates a better tire interface to be fast on or off the road
  • New 40mm rim depth makes a light and aero wheel in every situation
  • New ZR1 DB hub is engineered in Germany with better seal design for improved durability and quicker response with 66 points of engagement
  • Ships with 12mm front and rear end caps
  • Center locking rotor interface. Lockring is included with the wheels
  • XDR or SRAM/Shimano driver bodies
  • Campagnolo driver body sold separately

 

ABLC SawTooth

ABLC Sawtooth dimple design helps manage air flow around the rim, and contributes to create a faster, more stable wheel.

 

AeroBalance

Zipp’s sole mission is to help you go faster. That's why our wheels are race-ready before they're camera-ready. For years, Zipp has used a combination of testing methods – wind tunnel, CFD computer simulations, pro athlete evaluations, on-road testing, and the RollingRoad ride simulator – to refine aero performance to new levels of excellence. Over the decades of innovation, our engineers have learned to look beyond just focusing on simply reducing aero drag. Instead, the goal now is to reduce aero drag while also minimizing the effects of crosswinds on handling. This optimizing of aero efficiency and crosswind stability became known internally at Zipp as AeroBalance. The approach began with Firecrest technology and has been advanced with the introduction of the NSW lineup, especially with the Sawtooth technology found in the 454 and 858 NSW. Sawtooth accomplishes this with a series of patented fin-shaped Hyperfoil nodes along the inner diameter of the rim that work together with our new HexFin ABLC dimples for improved airflow.

 

TSE Technology

Zipp’s TSE Technology (Total System Efficiency) was developed by our engineers in the Nest Advanced Development Lab in Indy. This approach to carbon-wheel manufacturing means the Firecrest’s precise rim layup results in greater all-around efficiency for greater speed through reduced: Wind resistance, rolling resistance, gravity (weight + durability), vibration losses

 

Specifications

SIZE (WHEELS) 700c
RIM CONSTRUCTION Carbon – Hookless
HUB ZR1 Disc Brake
TYRE COMPATIBILITY Tubeless tyres only
RIM DEPTH 40mm
BRAKE COMPATIBILITY Disc (Center Lock)
DRIVER BODY TYPE n/a, SRAM XDR, SRAM/Shimano Road
RIM - INSIDE WIDTH 25mm
MAX RECOMMENDED SYSTEM WEIGHT 250lbs/114kg
MAX TYRE PRESSURE 73psi/5.0bar
RIM FINISH UD fiber, adhesive decals
RIM PROFILE Symmetrical
SPOKE LENGTH DS 266mm, 272mm
SPOKE LENGTH NDS 270mm
WEIGHT (G) 1408
WEIGHT BASED ON Lightest configuration: 12mm through axles and XDR body. No tape or valve included in weight.

 

(00.1918.529.00_)

  • Zipp graphics and cosmetic identity that scream speed
  • Versatile endurance wheelset for the modern road bike with tubeless and hookless rim profile
  • Lighter Weight than its predecessor, making it nimble and fast.
  • Tubeless Made Easy, optimized tire bed sign allows for simple tool-free installation and removal with no need for an air compressor to seat the tire.
  • Ultra-wide 25mm rim profile creates a better tire interface to be fast on or off the road
  • New 40mm rim depth makes a light and aero wheel in every situation
  • New ZR1 DB hub is engineered in Germany with better seal design for improved durability and quicker response with 66 points of engagement
  • Ships with 12mm front and rear end caps
  • Center locking rotor interface. Lockring is included with the wheels
  • XDR or SRAM/Shimano driver bodies
  • Campagnolo driver body sold separately

 

ABLC SawTooth

ABLC Sawtooth dimple design helps manage air flow around the rim, and contributes to create a faster, more stable wheel.

 

AeroBalance

Zipp’s sole mission is to help you go faster. That's why our wheels are race-ready before they're camera-ready. For years, Zipp has used a combination of testing methods – wind tunnel, CFD computer simulations, pro athlete evaluations, on-road testing, and the RollingRoad ride simulator – to refine aero performance to new levels of excellence. Over the decades of innovation, our engineers have learned to look beyond just focusing on simply reducing aero drag. Instead, the goal now is to reduce aero drag while also minimizing the effects of crosswinds on handling. This optimizing of aero efficiency and crosswind stability became known internally at Zipp as AeroBalance. The approach began with Firecrest technology and has been advanced with the introduction of the NSW lineup, especially with the Sawtooth technology found in the 454 and 858 NSW. Sawtooth accomplishes this with a series of patented fin-shaped Hyperfoil nodes along the inner diameter of the rim that work together with our new HexFin ABLC dimples for improved airflow.

 

TSE Technology

Zipp’s TSE Technology (Total System Efficiency) was developed by our engineers in the Nest Advanced Development Lab in Indy. This approach to carbon-wheel manufacturing means the Firecrest’s precise rim layup results in greater all-around efficiency for greater speed through reduced: Wind resistance, rolling resistance, gravity (weight + durability), vibration losses

SIZE (WHEELS) 700c
RIM CONSTRUCTION Carbon – Hookless
HUB ZR1 Disc Brake
TYRE COMPATIBILITY Tubeless tyres only
RIM DEPTH 40mm
BRAKE COMPATIBILITY Disc (Center Lock)
DRIVER BODY TYPE n/a, SRAM XDR, SRAM/Shimano Road
RIM - INSIDE WIDTH 25mm
MAX RECOMMENDED SYSTEM WEIGHT 250lbs/114kg
MAX TYRE PRESSURE 73psi/5.0bar
RIM FINISH UD fiber, adhesive decals
RIM PROFILE Symmetrical
SPOKE LENGTH DS 266mm, 272mm
SPOKE LENGTH NDS 270mm
WEIGHT (G) 1408
WEIGHT BASED ON Lightest configuration: 12mm through axles and XDR body. No tape or valve included in weight.

 

SKU 00.1918.529.00_
Brand Zipp
Unit Of Measure ea